3 Series E46 316i (N42) TOUR
64 52 520
Removing and installing/replacing complete
compressor for A/C system (N42)
Caution!
Risk of damage!
Follow instructions for compressor replacement without fail.
Note:
A/C system is drawn off.
Remove front splash guard.
Remove intake filter housing.
Remove alternator drive belt.
Disconnect plug connection (1) in direction of arrow.
Release screws (2) and remove associated refrigerant lines.
Installation:
Replace sealing rings.
Observe tightening torque, 64 52 1AZ.
Note:
Secure A/C compressor (4) against falling out.
Release screws (3) and remove A/C compressor (4).
RA Removing and installing/replacing complete compressor for A/C system (N42)
BMW AG - TIS
21.01.2013 21:07
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -