3 Series E46 316i (N45) SAL
Note:
Tighten down cylinder head bolts from inside to outside.
Tightening torque 11 12 6AZ
.
Install and tighten down screws (1).
Tightening torque 25 Nm.
Align chain guide.
Install bearing pin of chain guide and tighten down.
Replace sealing ring.
Insert plug (1) and tighten down.
Tightening torque 25 Nm.
RA Removing and installing/sealing cylinder head (N40 / N45)
BMW AG - TIS
22.01.2013 07:37
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -
