3 Series E46 316i (N45) SAL
61 31 313
Replacing a brake lining sensor
Necessary preliminary tasks:
•
Remove wheel
Open plug housing (1).
Unclip lead of brake lining sensor (2) from plug housing (1).
Disconnect associated plug connection of lead from brake lining
sensor (2).
Feed lead from brake lining sensor (2) out of fixtures.
Press clip (1) together and detach brake lining sensor (2) in
direction of arrow from brake caliper (3).
Installation:
Make sure clip (1) and brake lining sensor (2) are correctly
seated in brake caliper (3).
RA Replacing a brake lining sensor
BMW AG - TIS
22.01.2013 13:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -