3 Series E46 316i (N46) SAL
Install bearing pin (2) of clamping rail and tighten down.
Replace sealing ring on plug (1).
Insert plug (1) and tighten down.
Tightening torque 45 Nm.
Install bearing pin of chain guide and tighten down.
Replace sealing ring on plug (1).
Insert plug (1) and tighten down.
Tightening torque: 25 Nm.
RA Replacing timing chain (N42/N46)
BMW AG - TIS
23.01.2013 00:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
