3 Series E46 316i (N46) SAL
Note:
For use on the N42/N40 engine, special tool 11 6 380 must be
remachined according to sketch with a 6.2 mm dia. drill bit to a
depth of A = approx. 45 mm.
This modification has already been taken into account for
reordering.
Press on valve stem seal with special tool 11 6 380 by hand up
to stop.
Assemble engine.
RA Replacing all valve stem seals - cylinder head removed (N40/N42/N45/N46)
BMW AG - TIS
23.01.2013 00:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -