3 Series E46 316i (N46) SAL
51 47 072
Removing and installing/replacing finishing
strip on entrance, rear left or right
Lever out clips (1) towards top with special tool 00 9 318
(universal wedge).
Carefully remove finishing strip (2) towards rear/top from clip (3).
If necessary, remove clips.
Remove clips from entrance with pliers (head of pliers surface-
ground).
Slide on clips (1) and align.
If necessary, replace damaged clips.
RA Removing and installing/replacing finishing strip on entrance, rear left or righ
BMW AG - TIS
23.01.2013 04:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -