3 Series E46 316i (N46) SAL
Detach prestamped positioning aid from base.
-
Positioning aid "C3" rear door, left (door brake).
-
Positioning aid "D3" rear door, right (door brake).
Align positioning aid with printed help markings (for bores and screw heads) and contact edge (2) on rear door and
press down.
Seal of rear door should just cover positioning edge (1) when attached.
Note:
In area A ... B, seal on door is stuck on with profile rubber
adhesive (sourcing reference: BMW Service).
RA Removing and installing/replacing seal on rear door, left or right
BMW AG - TIS
23.01.2013 04:51
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -