3 Series E46 316i (N46) SAL
Disconnect plug connection and remove fog lamp insert.
Replacement:
Adjust front fog lamps.
From 09/2001:
Left side only: Remove outside temperature sensor.
Remove cover from front wheel housing.
Disconnect plug connection (1).
Release screws (2) and remove fog lamp insert (3) in direction
of arrow.
Installation:
Make sure ventilation grommet is laid without kinks and is
sufficiently firmly seated.
Replacement:
Adjust front fog lamps.
RA Removing and installing/replacing left or right fog lamp insert (saloon/sedan, t
BMW AG - TIS
23.01.2013 06:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -