3 Series E46 316i (N46) TOUR
Note:
Central bolt (1) is tightened down further to approx. 60 Nm.
Special tool 11 9 190 / 11 5 120 may be used for gripping in
order to release the remaining tightening torque.
Remove slackened central bolt (1).
Remove hub (2) towards front.
Installation:
Replace radial seal.
Open plug (1).
Remove bearing pin (2) of clamping rail.
RA Replacing timing chain (N42/N46)
BMW AG - TIS
23.01.2013 20:12
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -