3 Series E46 316ti (N40) COMP
11 27 610
Removing and installing/replacing balancing
shaft housing with balancing shafts
(N40/N42/N45/N46)
Important!
Oil pump and balancing shafts form a single unit and must not
be separated.
Removal and installation of the balancing shafts is described in
the section "Removing and installing oil pump".
RA Removing and installing/replacing balancing shaft housing with balancing shafts
BMW AG - TIS
24.01.2013 18:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -