3 Series E46 316ti (N40) COMP
Replace sealing ring on plug (1).
Insert plug (1) and tighten down.
Tightening torque 45 Nm.
Install bearing pin of chain guide and tighten down.
Replace sealing ring on plug (1).
Insert plug (1) and tighten down.
Tightening torque: 25 Nm.
Check hub (2), replace if necessary.
Install hub (2).
RA Replacing timing chain (N40)
BMW AG - TIS
24.01.2013 18:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -
