3 Series E46 316ti (N40) COMP
16 12 000
Removing and installing/replacing fuel level
sensor (right) (complete unit)
Sucking the fuel out of the fuel tank,
refer to 16 00 005
Remove rear bench seat.
Fold floor trim panel (1) forwards.
Cut insulating mat at perforation and fold back, releasing rubber
grommet in process.
Release hexagon nuts (1) and remove cover (2).
Installation:
Check seal for cover (2), replace if necessary.
Unfasten plug connection (1) and disconnect.
Release hose clip (2) and disconnect hose (3).
RA Removing and installing/replacing fuel level sensor (right) (complete unit)
BMW AG - TIS
24.01.2013 19:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -