3 Series E46 316ti (N40) COMP
Before filling:
-
Switch ignition on.
-
Set heating controller to max. temperature.
-
Set fan to low setting. This opens the heating valves.
Perform filling operation slowly.
Close vent screw when bubble-free coolant emerges
Fill coolant expansion tank to max. cold fill level. Marking (2) is
then on a level with upper edge of coolant expansion tank.
Vent cooling system and check for leaks.
RA Draining and adding coolant (N42 / N40 / N45 / N46)
BMW AG - TIS
24.01.2013 19:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -