bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

45 Instrument Cluster Trim Panel > < 2 RA Removing And Installing_replacing Roofliner (with Slide_tilt Sunroof) (compact)
Page 2
background image

Detach mucket (1).

Installation:

The joint (2) is located above the driver's side.

Move both head restraints on front seat as far down as possible.

Remove roofliner (1) towards rear to rear lid.

Installation:

Installation sequence:

1. 

Secure roofliner at front in place with expansion rivet (in
left counter support of sun visor)

2. 

Secure roofliner at rear with expansion rivets (2) on
left/right

3. 

Screw down handles at rear left/right

4. 

Screw down handles at front left/right

5. 

Screw down sun visors and counter supports

6. 

Screw down roofliner at light aperture at front

Replacement only:

Remove support (1) from roofliner (2).

Version with anti-theft alarm system:

If necessary, remove retaining fixture (3) for ultrasound module.

RA  Removing and installing/replacing roofliner (with slide/tilt sunroof) (compact)

BMW AG - TIS

24.01.2013  23:36

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

45 Instrument Cluster Trim Panel > < 2 RA Removing And Installing_replacing Roofliner (with Slide_tilt Sunroof) (compact)