3 Series E46 316ti (N40) COMP
51 46 050
Removing and installing/replacing trim for tail
panel at top (compact)
Remove luggage compartment floor trim panel.
Release expansion rivets (1) on left/right.
Lever out cover caps (2) on left/right and release screws
underneath.
Lever out cover caps (4) on left/right.
Lever out trim (3) for tail panel on left/right from luggage
compartment wheel arch trims (5) and remove.
Installation:
Mounts (1) of trim (2) for tail panel must not be damaged.
Replacement only:
Lever out cover cap (3).
RA Removing and installing/replacing trim for tail panel at top (compact)
BMW AG - TIS
24.01.2013 23:40
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -