3 Series E46 316ti (N40) COMP
Replacement only:
Press down catches (1) and remove 12 V socket (2) from
luggage compartment wheel arch trim (2).
Installation:
Guide (3) must not be damaged.
Right side:
Release expansion rivet (1).
Pull out luggage compartment wheel arch trim (5) towards
bottom/inside from mount (3) and seatbelt finisher strip (2).
Installation:
Make sure mucket (4) is correctly seated.
Fastener (1) of flap on luggage compartment wheel arch trim (2)
must be correctly seated and must not be damaged.
RA Removing and installing/replacing left (or right) luggage compartment wheel arch
BMW AG - TIS
24.01.2013 23:42
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
