3 Series E46 316ti (N40) COMP
Carefully pull cover over mounts towards front.
Slide all cover lugs (1) in succession in direction of backrest
center (if necessary with cleaning wedge 00 9 323).
Installation:
Press tabs with special tool 00 9 323 into mounting on both
sides.
Grip lower cover (1) and padding and gently press clips (2)
together, pull out head restraint guide (3).
Remove cover and padding.
Installation:
Clips of head restraint guide (2) must not be damaged.
Replacement of backrest cover or padding only:
Pull cover out of padding.
Installation:
Feed cover lugs (1) into openings of padding (2). Make sure
piping (3) is resting in opening of padding (4).
RA Replacing backrest cover for right rear seat (through-loading system)
BMW AG - TIS
25.01.2013 00:21
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -