3 Series E46 316ti (N40) COMP
63 17 030
Removing and installing/replacing left or right
foglamp insert (M/aerodynamics package)
Necessary preliminary tasks:
•
Remove wheel arch cover at front.
Disconnect plug connection (1).
Note:
For purposes of clarity, illustration shows fog lamp trim removed.
Release screws (1).
Release adjusting screw for fog lamp (2) and feed out guide (4)
from fog lamp trim (3).
Remove fog lamp insert (5) together with retaining ring (6) in
direction of arrow.
Replacement only:
If necessary, remove bulb.
Installation:
Make sure retaining ring (6) engages correctly in fog lamp
trim (3).
Adjust front fog lamps.
RA Removing and installing/replacing left or right foglamp insert (M/aerodynamics p
BMW AG - TIS
25.01.2013 01:18
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -