3 Series E46 316ti (N42) COMP
Replace sealing ring.
Insert plug (1) and tighten down.
Tightening torque 45 Nm.
Align chain guide.
Install bearing pin of chain guide and tighten down.
Replace sealing ring.
Insert plug (1) and tighten down.
Tightening torque 25 Nm.
Rotate eccentric shaft (1) at hexagon as shown in illustration.
RA Removing and installing/sealing cylinder head (N42)
BMW AG - TIS
25.01.2013 14:28
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 7 -