3 Series E46 316ti (N42) COMP
Install snap ring.
Note:
The direction in which the pairing letters on the conrod point is
not important to its function. But they must be positioned the
same way on all, either on the left or right.
Install conrod bearing.
Screw special tool 11 2 050 (matching M9 E12 A/F conrod
bolts only) into conrod.
Screw special tool 11 8 330 (matching M8 E10 A/F conrod
bolts only) into conrod (2).
Attach special tool 11 8 330 so that cylinder protection (1)
points outwards (see picture).
RA Removing and installing/replacing all pistons (N40 / N42 / N45 / N46)
BMW AG - TIS
25.01.2013 14:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 5 -