3 Series E46 316ti (N42) COMP
Fit SAC clutch (1) on flywheel.
Pay attention to dowel pins (2).
SAC clutch (1) must be secured by way of dowel pins (2).
Insert screws and tighten down.
Tightening torque: 21 21 1AZ
.
Release spindle (1) until tension is completely removed from
diaphragm spring (2).
Release knurled screw (1) and remove special tool 21 2 170
from SAC clutch.
Release knurled screws (1) and remove special tool 21 2 190
from SAC clutch.
RA Removing and installing or replacing clutch (SAC 228 / 4 cyl. without M47TUE)
BMW AG - TIS
25.01.2013 15:46
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -