3 Series E46 316ti (N42) COMP
![background image](/bmw/3_Series_E46/316ti_N42_COMP/page-440009.png)
Hold layshaft in a press.
Select largest possible support surface on fixed wheel.
Remove fixed wheel from the layshaft by pressing.
Remove closing ring (1). For this purpose, bend the 4 tabs
outwards with pliers for this purpose.
Remove supporting ring (2) (two parts) and stop disc (3).
Installation:
Replace closing ring (1).
Remove 4th gear wheel (1), synchronizer ring (2) and needle
bearing (3).
Pull 3rd/4th gear sliding sleeve upward.
Caution!
Loose thrust pieces, balls and springs.
RA Detaching and mounting all synchronizing devices S5D 200G/250G
BMW AG - TIS
25.01.2013 15:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 9 -