3 Series E46 316ti (N42) COMP
63 21 180
Removing and installing/replacing left or right
tail light
Remove socket housing for rear light.
Note:
For purposes of clarity, illustration shows removed luggage
compartment panel.
Unscrew nuts (1).
Remove rear light (2) outwards.
Installation:
Make sure rear light seal is correctly seated, replace if necessary.
Make sure there is a uniform gap all round between outside of
rear light (2) and body sidewall.
RA Removing and installing/replacing left or right tail light
BMW AG - TIS
25.01.2013 22:06
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -
