3 Series E46 316ti (N42) COMP
67 62 000
Removing and installing/replacing flat motor
for front left or right power window unit
Necessary preliminary tasks:
•
Remove power window unit
Release screws (1).
Detach flat motor for power window unit (2) from power window
unit and remove.
Installation:
Fit flat motor for power window unit (2) exactly on teeth of power
window unit.
From 09/2003:
Replacement:
A normalization must be carried out in order to activate anti-
trapping protection.
Operating sequence for normalization:
•
Open corresponding window completely.
•
Press corresponding power window switch into "Close one-
touch operation" (second switch stage).
•
Once the upper end position has been reached, hold power
window switch down for approx. 1 second more.
Normalization is thus completed.
RA Removing and installing/replacing flat motor for front left or right power windo
BMW AG - TIS
25.01.2013 23:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -