3 Series E46 316ti (N42) COMP
86 10 ...
Replacing rear light
Release thumb screws (1), slide light guard (2) in direction of
middle of car and tilt out towards rear.
Turn handwheel (1) counterclockwise in direction of arrow and
remove base (2).
Release nuts (1) and press rear light (2) out towards front.
Installation:
Use new self-locking nuts.
Tightening Torque,
refer to Technical Data 86 10 1AZ.
RA Replacing rear light
BMW AG - TIS
25.01.2013 23:57
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -