3 Series E46 316ti (N45) COMP
Clean bearing surface of shaped part for cavity acoustic baffle on
body and on door pillar (A-pillar) spare part.
Clean shaped part for cavity sealing.
Coat shaped part for cavity acoustic baffle with recommended
window adhesive.
Install shaped part for cavity acoustic baffle in door pillar (A-pillar)
spare part.
Check sealing with window adhesive; if necessary, reseal with
window adhesive.
Then apply window adhesive to shaped part for cavity sealing and
opening for sunroof water drainage pipe.
Coat contact surface of shaped part for cavity sealing on sunroof
water drainage pipe with recommended window adhesive so as to
guarantee a complete seal.
Adjust door pillar to fit with straightening attachment or universal
mount and weld.
Weld up reinforcement plates.
RA Replacing front left door column (partial replacement) (front side panel removed
BMW AG - TIS
26.01.2013 18:19
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -