3 Series E46 316ti (N45) COMP
Open welding spots in areas (1).
Open weld spots in area (1).
Open welding spots in areas (1).
Open brazing seam in area (2).
Take off side panel.
Mark new part according to previous severance cuts (1) and only
cut outer metal plate. Open welding spots on outer plate of B-pillar
and remove component.
Mark B-pillar reinforcement according to previous severance cut
(2) and cut.
Adapt new part to body.
Clean connecting points to body and coat with welding primer.
RA Replacing rear left side panel (partial replacement, C- and D-pillars, top)
BMW AG - TIS
26.01.2013 18:22
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -
