3 Series E46 316ti (N45) COMP
Release screws and lever out cover for blower.
Disconnect plug.
Release retainer with special tool 51 3 057 and lever out
blower.
Installation:
Bridge (1) must snap into place in window (2) of blower
motor.
Lever out blower motor with impeller towards front. In so doing,
raise motor a little at rear.
RA Removing and installing heater blower (compact)
BMW AG - TIS
26.01.2013 21:38
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -