bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

4 RA Removing And Installing Or Replacing Alternator (M43, M43TU, M44)|Page 719 > < 3 RA Checking Alternator And Regulator Switch|Page 717
Page 1
background image

12 31 020

Removing and installing or replacing
alternator (M43, M43TU, M44)

General information, refer to 12 00 ...

M43, M44 only:

Read fault memory.

All:

Disconnect battery ground wire.

Follow instructions on disconnecting and connecting battery,

refer to 12 00 ...

Remove air cleaner upper section with air flow sensor or air-mass
flow sensor.

Remove alternator drive belts, refer to 11 28 010

With hydraulic drive belt tensioner:

Remove guide pulley.

Installation:

Fit screw in thread (1) of upper reversing roller.

RA  Removing and installing or replacing alternator (M43, M43TU, M44)

BMW AG - TIS

29.01.2013  23:43

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 1 -

4 RA Removing And Installing Or Replacing Alternator (M43, M43TU, M44)|Page 719 > < 3 RA Checking Alternator And Regulator Switch|Page 717