3 Series E46 318Ci (M43TU) COUPE
Note:
N45/N46 only!
Block the flywheel using Special Tool 11 9 260.
Release screws and remove SAC clutch from flywheel.
Important!
Do not use a special tool to detach SAC clutch from flywheel.
Remove clutch plate (1) from flywheel.
Clean flywheel, check for wear and damage.
Replace damaged flywheel.
Check deep-groove ball bearing in crankshaft for ease of
movement and leaks and if necessary replace ball bearing.
Important!
Always replace clutch plates fouled e.g. by oil, cleaning agent.
Check clutch plate for damage and friction rust in hub profile and
replace if necessary.
RA Removing and installing or replacing clutch (SAC 228 / 4 cyl. without M47TUE)
BMW AG - TIS
30.01.2013 00:33
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -