3 Series E46 318Ci (M43TU) COUPE
Install output shaft with parking lock gear (1).
Installation:
Note position of parking lock gear with pawl.
Installation:
To check, calculate measurement between contact face (1)
and parking gear (2) with special tool 00 2 550 .
Planetary gear set and output shaft with parking gear are correctly
installed when distance is 16 mm to 18.1 mm.
In event of overdimension or underdimension: repeat installation
procedure.
Push on washer (1).
RA Removing and installing or replacing transmission extension housing (A4S 200R)
BMW AG - TIS
30.01.2013 01:08
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 8 -
