3 Series E46 318Ci (M43TU) COUPE
34 33 051
Removing and installing/replacing non-return
valve for brake booster M43TU
Note:
Note "General Data",
refer to 34 00 ...
Before beginning work, actuate brake pedal several times to
reduce vacuum in brake booster to make it easier to pull off
vacuum hose.
Open hose clip (1), detach vacuum hose (2) from non-return valve
(3).
Remove non-return valve (3) from brake booster.
Installation:
Check seal for non-return valve, replace if necessary.
Replace hose clip (1).
RA Removing and installing/replacing non-return valve for brake booster M43TU
BMW AG - TIS
30.01.2013 03:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -