3 Series E46 318Ci (M43TU) COUPE
Roughly cut connection for side member on left.
Note:
Light arrow points in direction of travel.
1 = Old part, luggage compartment floor
2 = Floor assembly
3 = Mating surface, luggage compartment floor/floor assembly
Roughly cut connection for side member on right.
Note:
Light arrow points in direction of travel.
1 = Old part, luggage compartment floor
2 = Floor assembly
3 = Mating surface, luggage compartment floor/floor assembly
Remove scrap metal. Straighten and grind joint surfaces.
Fit in trunk floor plate with straightening attachment and clamp.
Note:
Mark out holes for plug welding in area of spare wheel recess
(1) on account of impressions from underside.
Mark holes for plug welding of
spare wheel recess area (1)
wheel arch extension (2)
floor assembly (3)
RA Replacing complete rear luggage compartment floor (tail panel removed) (E46)
BMW AG - TIS
30.01.2013 04:59
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -
