3 Series E46 318Ci (M43TU) COUPE
At connection for cover for side member, set spots close enough
together to create an enclosed seam.
Locate welding spots in a way which prevents distortion caused by
heat elongation. Ensure that welded areas have cooled down
sufficiently.
Danger of distortion!
Mark connection point of rear window frame and water drain with
dots, apply brazed seam.
Weld connection points between
-
side window
-
wheel arch and
-
wheel arch extension
Weld connection points between
-
B-pillar
-
floor plate
RA Replacing rear left side panel (partial replacement, C-pillar) (E46 Coupé)
BMW AG - TIS
30.01.2013 05:17
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 14 -