3 Series E46 318Ci (M43TU) COUPE
Caution!
-
Carry trim strip by its middle section only (risk of damage)
-
Installation must be carried out by two workers
-
Prepositioning of trim strip
Installation:
Trim strip (1) must be fitted over entire length to metal fold (2)
at distance (A).
Handle end of special tool 00 9 319 (small striking wedge) has
measurement (B). Wrap round with adhesive tape until
measurement (A) is obtained.
A
22.5 mm
B
22.2 mm
Installation:
First position trim strip (1) in corner so that trim strip (3) can be
fitted and then secure with screws (2).
Installation:
Trim strip (1) must have a distance of 22.5 mm over the entire
length to metal fold.
Adjust trim strip (1) with special tool 00 9 319 and tighten down all
screws.
Tightening Torque,
refer to Technical Data 51 13 2AZ.
RA Removing and installing/replacing trim strip on left or right water drain (Coupé
BMW AG - TIS
30.01.2013 05:39
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -