bmw Workshop Repair Guides

BMW Workshop Service and Repair Manuals

2 RA Removing And Installing_replacing Front Left Or Right Door Window (Coupé, Conver|Page 2270 > < 2 RA Removing And Installing_replacing Front Left Or Right Door Window (Coupé, Conver
Page 2
background image

Note:

Screw has left-hand thread; turn clockwise to release.

Release screw (1).

Installation:

Insert door window glass (4) in guide rail (3).

Install screw (1) with adjusting sleeve (2) through guide rail (3)
and door window glass (4).

Tightening torque 51 32 2AZ

.

Remove door window glass (1) from front door (2).

Installation:

Adjust door window glass.

Note:

Rubber ring (1) may be damaged during removal of door window
glass.

If necessary, replace rubber ring (1).

Replacement:

Lever out threaded sleeve (1).

Remove shim (2) with clamping plate from door window
glass (3).

Note:

Convertible only:

Door window glass is partly coated with Aquapell; this is identified
by a white dot on the door window glass.

RA  Removing and installing/replacing front left or right door window (Coupé, Conver

BMW AG - TIS

30.01.2013  06:24

Issue status (12/2007) Valid only until next DVD is issued

Copyright

Page  - 2 -

2 RA Removing And Installing_replacing Front Left Or Right Door Window (Coupé, Conver|Page 2270 > < 2 RA Removing And Installing_replacing Front Left Or Right Door Window (Coupé, Conver