3 Series E46 318Ci (N46) COUPE
Please refer to Repair Instructions 34 00 048.
Then carry out a test drive.
3.
If the complaint is still present, examine the rubber mounts on both front axle control
arms.
Important!
Only replace the holder with rubber mount if the rubber mount is leaking or if the
rubber material is damaged.
Please refer to Repair Instructions 31 12 049.
Note:
The holder with rubber mounts on the left and right must be replaced.
Important!
On no account is the restrictor valve to be installed on vehicles with "Dynamic
Stability Control" (DSC). DSC control operations could be negatively affected.
Note on installation:
When installing the holder with rubber mount, take care to ensure that version
corresponding to the control arm version installed is used.
See Parts
A) Control arm version A installed in
vehicles from start of series
production until 07/1999
B) Control arm version B installed in
vehicles since 07/1999 or following
an exchange
Parts:
Description
Part number
Quantity
Restrictor valve (only for vehicles without
DSC)
34 31 6 750 384
1
Brake fluid
81 22 9 407 512
1000 ml
Set of holders with rubber mount
for control arm version A
31 12 6 757 622
1
Set of holders with rubber mount
for control arm version B
31 12 6 757 623
1
Hexagon bolt with washer, M10x35
for holder with rubber mount
31 10 1 095 140
4
Hexagon bolt with washer, M10x35
for reinforcement cross
31 10 1 095 140
4
Hexagon bolt with flange, M10x30
for reinforcement plate
51 71 7 892 988
8
SI Steering wheel jerking on rapid brake application E46, except four-wheel drive a
BMW AG - TIS
07.02.2013 12:36
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -