3 Series E46 318Ci (N46) COUPE
Installation:
Replace and lubricate O-rings (1 to 3).
Replace oil filter element (4).
Note:
Reinforcement plate not shown.
Release screw plug in oil sump.
Installation:
Replace sealing ring.
Tightening torque 11 13 1AZ
.
Pour in engine oil.
Start engine and run at idle until oil pressure warning lamp
goes out.
Note:
Vehicles with dipstick:
•
Park vehicle on a horizontal surface.
•
Switch off engine, wait approx. 5 minutes and then check
engine oil level.
•
Top up engine oil if necessary.
Vehicles without dipstick:
•
Park vehicle on a horizontal surface.
•
Allow engine at normal operating temperature to run for 3
minutes with increased revs (min 1000 / max 1500 rpm).
•
Read off engine oil level in instrument cluster or on Control
Display.
•
Top up engine oil if necessary.
RA BMW engine oil service incl. supplementary service (N40/N42/N45/N46)
BMW AG - TIS
07.02.2013 14:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -