3 Series E46 318Ci (N46) COUPE
Unscrew hollow union bolt.
Push oil line (1) for lubricating exhaust camshaft approx. 20 mm
towards rear.
Turn back special tool 11 9 293 .
Remove special tools 11 9 291 and 11 9 292 .
Rotate eccentric shaft (1) at hexagon as illustrated in order to
reduce tension on torsion spring (2).
Pretension torsion spring (2) with a cable strap (1), feed out
from roller (3) and carefully relieve tension.
RA Removing and installing/replacing exhaust camshaft (N42/N46)
BMW AG - TIS
07.02.2013 14:43
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -