3 Series E46 318Ci (N46) COUPE
Turn back special tool 11 9 293 .
Fit special tool 11 9 291 on exhaust camshaft and check timing
adjustment.
Note:
The timing is correctly adjusted when the special tool 11 9 291
rests without any gap on the cylinder head or is raised up to
1.0 mm to inlet side.
Install positioning motor for eccentric shaft.
Install cylinder head cover.
Assemble engine.
RA Removing and installing/replacing inlet and exhaust adjustment unit (N42/N46)
BMW AG - TIS
07.02.2013 14:50
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 11 -