3 Series E46 318Ci (N46) COUPE
Installation:
Push groove (1) on ring (3) of sealing cap into opposing lug (2)
of arrow mark on cylinder head cover.
Press ring (3) downwards (pay attention to arrow mark).
Make sure all three lugs are engaged.
Fold down and close sealing cap.
320Si only:
Pull ignition coil cover (1) out of rubber grommets and remove.
RA Removing ignition coil cover (N42 / N46)
BMW AG - TIS
07.02.2013 15:30
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -