3 Series E46 318Ci (N46) COUPE
Installation:
Replace inner sealing ring (1) on output flange (2).
Caution!
There are two different output flanges; do not mix them up!
Version 1 (without spring washer)
Identifying features:
There is no spring washer fitted between the flange nut and output
flange to secure the output flange (2) on the flange nut (1).
When this output flange is replaced, the add-on kit detailed below
must be retrofitted.
Caution!
Only the modified version (Version 2) is still available as a
replacement.
Retrofit kit:
1
Snap ring
2
Sealing ring
3
Output flange
4
Spring washer
5
Flange nut
Install add-on kit for output flange,
refer to 24 21... Installing add-on kit for output flange.
RA Replacing output flange (A5S 360R / 390R)
BMW AG - TIS
07.02.2013 17:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -