3 Series E46 318Ci (N46) COUPE
Version 2 (with spring washer)
Identifying features:
1
As the substitute, the output flange with spring washer (2) is
identified with a white marking (1) around its circumference.
Note:
In series production, the output flange with spring washer is
fitted from transmission serial number 7912 and has no color
marking.
2
The spring washer (1) is fitted between flange nut and output
flange (2).
Caution!
If the version 2 output flange is replaced by a version 2 model,
the snap ring supplied in the add-on kit (see also Fig. R24
0489, item 1) must not be replaced because the fitted snap
ring is difficult to remove. The fitted snap ring must be left in
the transmission!
RA Replacing output flange (A5S 360R / 390R)
BMW AG - TIS
07.02.2013 17:01
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 4 -