3 Series E46 318Ci (N46) COUPE
Insert dust sleeve in front annular groove and press into annular
groove over entire diameter.
Installation:
Area between dust sleeve and brake caliper housing must be kept
dry. It must not come into contact with Ate brake cylinder paste or
brake fluid so as to ensure that the dust sleeve is perfectly seated.
Support brake piston with commercially available extension and
socket and press gently onto dust sleeve.
Blow on sleeve with compressed air (max. 3 bar). Sleeve jumps
over brake piston.
Installation:
Coat dust sleeve and brake piston with brake fluid to facilitate
installation of dust sleeve.
RA Overhauling left or right rear brake caliper (brake caliper removed)
BMW AG - TIS
07.02.2013 19:25
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 3 -