3 Series E46 318Ci (N46) COUPE
Detach pipe (1) from intermediate piece (2) and from master brake
cylinder (3). Remove pipe with rubber grommet.
Installation:
Observe Tightening Torque,
refer to 34 32 1AZ
Ensure that rubber grommet is correctly seated.
Unfasten plug connection (1).
Detach pressure sensor (2) from master brake cylinder (3).
Installation:
Observe Tightening Torque,
refer to 34 51 2AZ.
RA Removing and installing/replacing pressure sensor "H" for DSC
BMW AG - TIS
07.02.2013 19:47
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 2 -