3 Series E46 318Ci (N46) COUPE
36 11 522
Removing and installing/replacing front
receiving antenna for RDC
Front left
Remove panel (1).
Unfasten plug connection (1) and disconnect.
Release screws (2) and remove receiving antenna (3).
Front right
Release panel (1) and carefully pull towards rear.
Unfasten plug connection (2) and disconnect.
If necessary, disconnect plug connection on outside temperature
sensor.
Release screws (1) and remove receiving antenna (2) from panel
(3).
RA Removing and installing/replacing front receiving antenna for RDC
BMW AG - TIS
07.02.2013 20:05
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -