3 Series E46 318Ci (N46) COUPE
Align height of hood lid to side walls at front.
Point (2) = measurement (B) = 150 mm.
Height of hood lid to side wall: - 0.3
+0,.3
-0.8 mm,
i.e. hood lid is 0.3 mm lower than side wall.
Hood lid may deviate from specification by 0.3 mm higher or 0.8
lower.
There is a continuous transition of the height of the hood lid to the
side wall within the specified measurements between (1) and (2).
Raise hood lid.
Tighten down released screws on hinges again.
Lower hood lid several times so that the locks can be centered.
Caution!
Do not let the hood lid lock.
Tighten down screws of hood lock upper section on left and right.
RA Aligning hood lid
BMW AG - TIS
07.02.2013 21:16
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 6 -