3 Series E46 318Ci (N46) COUPE
51 43 063
Removing and installing/replacing upper
section of rear left or right armrest (Coupé)
Note:
Place a clean cleaning cloth between special tool 00 9 318
and armrest (risk of damage).
Lever out upper section (1) at front with special tool 00 9 318
(universal wedge) towards top.
Unclip rest of upper section (1) towards top.
Pull upper section (1) towards front/top off armrest (2).
Installation:
Plastic pins (1) and guide (2) on upper section (3) must not
be damaged.
Installation:
During removal, clips (1) can be pulled out with the upper
section.
If necessary, replace faulty clips (1) on armrest (2).
Before the upper section is installed, all clips (1) must be in
the armrest supports (2).
RA Removing and installing/replacing upper section of rear left or right armrest (C
BMW AG - TIS
07.02.2013 22:54
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -