3 Series E46 318Ci (N46) COUPE
51 71 080
Removing and installing/replacing heater
bulkhead
Necessary preliminary tasks:
•
Remove microfilter for passenger compartment ventilation
Unclip retainers (1) and feed cable out of cable duct.
Release screws (1) and remove microfilter housing towards front.
Installation:
Seals on microfilter housing must not be damaged or missing.
Detach rubber strip (1).
Release locks (2) and pull side trim forwards a little.
RA Removing and installing/replacing heater bulkhead
BMW AG - TIS
07.02.2013 23:14
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -