3 Series E46 318Ci (N46) COUPE
65 52 013
Removing and installing complete on-board
monitor (widescreen)
Special tools required:
•
65 1 110
Remove center fresh air grill (with decorative strip).
Note:
Use of special tool 65 1 110 , shown on left side with complete
on-board monitor removed (same procedure applies for use on
right side):
Feed in special tool 65 1 110 for extended trim for on-board
monitor (3) as illustrated until pawl (1) of catch (2) snaps into
place.
After removing complete on-board monitor, press catch (2) and
feed out special tool 65 1 110 again.
Extend trim for on-board monitor (1) as illustrated.
Note:
Trim for on-board monitor (1) returns after approx. 15 seconds to
its initial position.
Using special tool 65 1 110 , unlock complete on-board
monitor (2) at bottom left and right and pull out in direction of
arrow.
Note:
Secure complete on-board monitor (2) against falling out.
Unlock side plug connections and disconnect.
Remove complete on-board monitor (2).
RA Removing and installing complete on-board monitor (widescreen)
BMW AG - TIS
08.02.2013 02:55
Issue status (12/2007) Valid only until next DVD is issued
Copyright
Page - 1 -